New Machinery


Forging Industry Association logo

Save

Save

Share:

(2) 44 MW GE LM 6000 Nat Gas Turbines (total 88MW)
w/PC Sprint Boost, 60hz, 2000 hrs since rebuild, Re:26308

26308
  1. BASIC SCOPE OF SUPPLY

The following equipment and services are included in the basic scope of supply:

  • LM6000 gas turbine engine equipped with inlet bell mouth and screen.
  • GAS fuel, water injected combustion system, complete and self-contained on the unit, with connection on the baseplate for customer's filtered, regulated fuel supply at 625 psig ± 20 psig.
  • Generator, 13,800 Volt, 60 Hz, 3600 RPM. Low maintenance brushless excitation system suitable for Class I, Group D, Div 2 areas.Neutral and line cubicles with CTs, surge protectors and lightning arrestors.
  • SPRINT (Spray Intercooling) power augmentation option.
  • I-beam baseplates for turbine, generator and unit mounted accessories.
  • Acoustic enclosure for gas turbine and generator.
  • Redundant ventilation systems and AC internal lighting.
  • Multi stage air inlet filtration system for both gas turbine and generator, including weather hoods, inlet screen, pre-filter, final barrier filter, intake silencer, and standard ducting to plenum chamber. Filter house ladders and platforms are included.
  • Electro-hydraulic start system.
  • Separate oil systems for gas turbine and generator, including duplex filters, duplex water/oil coolers, stainless steel piping, and stainless-steel reservoirs.
  • Unit control panel for indoor mounting in a controlled environment, including microprocessor fuel management and sequencing system, generator metering, Bentley Nevada vibration monitoring, CRT annunciation of alarms and shutdowns, and Ethernet/Modbus interface to customer’s DCS.
  • I/O cubicle mounted on gas turbine enclosure.
  • 24V DC control system battery with dual battery chargers.
  • Fire and gas detection and extinguishing system, serving both turbine and generator compartments,
  • “Soak wash” system for simple cycle service.
  • Generator factory testing to IEEE or IEC standards. Gas turbine performance test by : G.E.; full load string test and performance verification of turbine generator set at S&S factory (Houston).load string tested
  • Six sets of drawing and data packages, O & M manuals.

OPTIONAL EQUIPMENT AND SERVICES

(I) included in base price (S) Quoted separately

( ) Option H - Dual fuel system

( I ) Option I - Water injection metering system (NOx control with gaseous, liquid or dual fuel

systems)

( I ) Option X – SPRINT (Spray Intercooling) power augmentation

(1) Exhaust stack

Used Power Plants
Note

Items not included in our offer:

- Fuel, fluids and chemicals

- Fuel storage tanks and forwarding equipment

- Water treatment and purification equipment

- Deaeration and chemical injection equipment

- Heat recovery boiler

- Boiler feed pump and auto level control assembly

- Automatic blowdown controls

- Absorption chiller and chilled water supply system

- Buildings, foundations and foundation embedment’s

- Filter house support structure other than standard

- High voltage transformer(s), switchgear and associated equipment

- Distributed plant control or remote-control panels

- Balance of plant and energy optimization controls

- Desuperheater equipment

- Steam turbine generator set

- Steam turbine condenser and condensate pumping equipment

- Cooling tower and circulating water system

- Interconnecting piping, conduit, and wiring between equipment modules

- Power plant calibration tools and ordinary hand tools

- Yard light and fences

- Spare parts other than start-up spares

Used Power Plants
Specifications
Rating
44MWx2
44MWx2
 
Type
Gas Turbines
Gas Turbines
 
Manufacturer
GE
GE
 
Model
LM 6000
LM 6000
 
Fuel
Natural Gas
Natural Gas
 
Hz
60
60
 
Age
2002
2002
 
Ref #
26308
26308
 
Note

Items not included in our offer:

- Fuel, fluids and chemicals

- Fuel storage tanks and forwarding equipment

- Water treatment and purification equipment

- Deaeration and chemical injection equipment

- Heat recovery boiler

- Boiler feed pump and auto level control assembly

- Automatic blowdown controls

- Absorption chiller and chilled water supply system

- Buildings, foundations and foundation embedment’s

- Filter house support structure other than standard

- High voltage transformer(s), switchgear and associated equipment

- Distributed plant control or remote-control panels

- Balance of plant and energy optimization controls

- Desuperheater equipment

- Steam turbine generator set

- Steam turbine condenser and condensate pumping equipment

- Cooling tower and circulating water system

- Interconnecting piping, conduit, and wiring between equipment modules

- Power plant calibration tools and ordinary hand tools

- Yard light and fences

- Spare parts other than start-up spares